 |
 |
S & S Rebuilt Engines |
|
 |
| |
| |
|
We have been manufacturing automotive, diesel, light truck and marine engines since 1972. It is extremely important to have well trained machinist and up to date equipment when manufacturing today's engines. It is now common for us to manufacture an engine with two camshafts, sixteen valves with finishes unheard of five years ago. With today's high performance engines demanding clearances of .002, experienced machinist with constant training and continual upgrading of equipment is essential.
It takes a great deal of continual capital investment and commitment to maintain and up grade the equipment required to meet the critical specifications of today's engines. Two years ago a finish of .028 RA (scratches verse area) similar to smooth sand paper was the standard finish for the deck surface on cylinder heads, today with the new head gaskets designed for high compression and unleaded fuel a finish of .008 (glass finish) is required. The milling equipment of just three years ago is not capable of meeting today's requirements, and that's just for the cylinder head finish, new finishes are required for the cylinder walls, valve guides, (both of these require diamond hones) crankshafts journals, thrust surfaces, just to mention a few. And of course none of the new equipment is going to do anything if a qualified machinist is not present to run it. Many of our machinists have been with us since 1972 and fifteen years experience is the norm.
Even with the best equipment and experienced machinists it's possible to build an inferior engine, all you have to do is buy inferior parts. All engine remanufactures depend on suppliers for pistons, pistons rings, engine bearings, valves, etc. and if the engine builder is price conscious and buys cheep parts or worse yet, uses some parts from an old engine (it happens), the best machining in the world won't help. There are a lot of cheep parts suppliers out there and there are a lot of engine rebuilders who use them. The best way to shop for an engine is to make sure the builder clearly states he uses parts that are original equipment manufactured (OEM) parts or equivalent. By equivalent I mean the parts supplier designs and manufactures parts for General Motors, Ford, Chrysler, etc. and also sells to engine rebuilders. An inferior parts supplier does not meet OEM specifications.
Even with the best equipment and parts all our engines are tested on a Sim-test run in stand before shipping to insure quality is maintained, testing oil pressure, oil flow, torque, friction, and vacuum testing the casting one last time for integrity.
As I stated earlier, we have been manufacturing automotive, truck, diesel and marine engines since 1972 and believe me I have seen a lot of changes made since then. We started out building five engines a month; today we are building five hundred a month. We could build more, however it is not our policy to build the most possible, we want to build the best. Quantity is not Quality; we will continue to build what I consider the best engine on the market and in order to do that, maintaining control of production is paramount.
Contact:
Toll Free Num:(866) 267-5522
Local Phone:(509) 325-4558
Fax:(509) 325-4558
E-mail:sales @ rebuiltautoengines.com
Webmaster: webmaster @ rebuiltautoengines.com
|
|
|
 |
|
Traffic Analysis |
|
|
|
Similar Sites |
|
|
| |
Water cooling pumps manufacturers and suppliers - Industrie Saleri Italo: In 1942 Italo Saleri founded the factory and started the production of motorcycles parts, bronze bushings and batteries clamps. Ten years later, in 1952, Mr. Saleri had already managed to
Paul Trading Corp.: Eestablished on march 1, 1994, Paul trading is a young company, while it holds strong characteristics.
Centering on the company's representative and president, Nam Jun Hee, total members are each in
Tri Star Engine Supply : Tri Star Engines and Transmissions was founded in 1988 by Dave Steine. What started out as a one man operation has grown to become one of the largest distributors of
Chevy 350 engines - Remanufactured 350 engine, GM Chevrolet Crate & Rebuilt Engines: Our remanufacturing engine plants were established over thirty year ago. We built 145 long blocks our first year in business and now exceed 5,000 engine units a year.
We are
WAP, Inc. - Glow Plugs for Diesel Engines, Off Highway and Automotive Applications: In the late 1940's, WAP, Inc., then General Electric, invented the sheathed glow plug for use by International Harvester and Caterpillar. Today, WAP, Inc., formerly Wellman Automotive Products, manufactures and
Maerkisches Werk of North America: Maerkisches Werk of North America (MWNA) is an independent corporation, and a wholly owned subsidiary of its parent, Märkisches Werk Halver, GmbH (MWH).
MWNA sells, markets, and distributes MWH engine
The BG Service Company Inc., a leading manufacturer of ignition accessories, electric feedthroughs. : The BG Corporation was founded circa 1918 in New York by Charles Brewster and Arthur Goldsmith. Brewster, an engineer, and Goldsmith, a jeweler, established the company for the purpose of
China Brake, Brake Pads, Clutch, Coil Spring, Air Filter, Turbocharger Manufacturer - CBS Auto Parts, Inc: CBS Auto Parts, Inc is specializing in manufacturing and exporting quality auto parts, We have our own factories for Brake Parts, Clutch Parts, Suspension Parts, We also dealing with thousands
China Atv, Dirt Bike, Pocket Bike, Electric Bicycles Manufacturer - China Huina Vehicle Co., Ltd.: China Huina Vehicle Co., Ltd. We are professional Off-Road Dirt Bike & EEC scooter & ATV Manufactuer in china!
China Huina Vehicle Co., Ltd. Is Located In The Hudai Town
China Auto Parts, Automotive Parts, Automobile Parts Manufacturer - Csmart International Trading Co., Limited: Csmart Int'l Trading Co., Ltd is a leading integration & professional services company in the automotive parts. We see ourselves as the best choice in the market for customers interested
China Auto Parts, Shock Absorber, Ball Joint, Universal Joint, Spark Plug Manufacturer - Delta Auto Parts Co., Ltd.: Delta Auto Parts Co., Ltd. Is a china-based manufacturer & exporter of automobile parts like shock absorber, c. V. Joint, ball joint, universal joint, water pump, fuel pump, clutch cover,
China Relay, Energy Meter Parts, Auto Parts, Building Electricals Manufacturer - NCR Industrial Inc.: Established in 1990, NCR is developed to one of the most reputable groups in China. Our products involve in four field: Passive components (Relays, Contactors etc. ); Automotive Parts (Wipers,
|
|
|
|
|
|
